Maintenance
Body and Framework
130 9821/6100-4 130
Figure 101.
A Grease point
1. Make the machine safe with the excavator lowered.
Refer to: Maintenance Position (Excavator Arm Lowered) (Page 122).
2. Get safe access to the grease point.
3. To make sure that the grease is fully distributed:
3.1. Grease in, use four strokes of the grease gun, then turn the upper structure.
Angle: 180°
3.2. Grease in, use four strokes of the grease gun, then turn the upper structure.
Angle: 180°
3.3. Grease in, use four strokes of the grease gun.
Pivot Pins
Lubricate
WARNING You will be working close into the machine for these jobs. Lower the attachments. Remove
ignition key and disconnect the battery. This will prevent the engine being started.
Make the machine safe with the excavator lowered. Refer to: Maintenance Position (Excavator Arm Lowered)
(Page 122).
Grease the pivot pins according to the illustration. Refer to Figure 102.
To Next Page
Loading...
Need help?
General
