Operation
Getting the Machine Moving
55 9821/6100-4 55
Getting the Machine Moving
General
WARNING Do not dismount a moving machine.
The machine does not have gears. Do not overwork the engine unnecessarily. Operate at an engine speed
suitable for the duty being carried out.
When moving the machine, keep it under control at all times. Stay alert for obstructions and possible hazards.
Approach deep mud slowly.
Take particular care when reversing. Make sure that the way behind is clear before reversing.
Procedure
After you have warmed up the engine, move off as described below.
Control and switch locations are provided within this manual.
1. Make sure that your seat belt is correctly fastened.
2. Make sure that the seat is correctly adjusted.
3. Make sure that the cab slew lock is disengaged and the slew switch is pressed.
4. Move off.
4.1. Check that the attachments are in the travel position.
4.2. Take hold of both track control levers in one hand or put your feet on the foot pedals.
4.3. Make sure that it is safe to move off.
4.4. Move the levers forward or backward as required and pull the throttle lever slowly backwards until
the desired speed is attained.
4.5. To increase tracking speed operate the two speed tracking switch.
To Next Page
Loading...
Need help?
General
