About the Product
Safety Labels
12 9821/6100-4 12
Safety Labels
General
WARNING Safety labels on the machine warn you of particular hazards. You can be injured if you do not
obey the safety instructions shown.
The safety labels are strategically placed around the machine to remind you of possible hazards.
If you need eye-glasses for reading, make sure you wear them when reading the safety labels. Do not over-
stretch or put yourself in dangerous positions to read the safety labels. If you do not understand the hazard
shown on the safety label, then refer to Safety Label Identification.
Keep all of the safety labels clean and readable. Replace a lost or damaged safety label. Make sure the
replacement parts include the safety labels where necessary. Each safety label has a part number printed on
it, use this number to order a new safety label from your JCB dealer.
Safety Label Identification
Figure 7.
Table 3. Safety labels
Item Part Number Description Qty
A 817/70112 Crush hazard. Keep a safe distance from the moving parts. 2
B 817/70006 Fall. Unexpected machine movement because of accidental contact with
the machine controls if the hydraulic functions are not isolated.
1
C 332/V3761 Flying debris warning. Refer to: ttachments (Page 87). 1
D 817/70029 Crush hazard. Wear the seatbelt when you operate the machine. 1
E 333/R0983 Fall. Unexpected machine movement because of accidental contact with
the controls when the hydraulic system is not isolated.
1
F 817/70102 Crushing of fingers or hands. Remove the starter key and refer to the
Service Manual before you start maintenance work.
1
G 817/70004 Burns to fingers and hands. Stay a safe distance away. Warning. 1
To Next Page
Loading...
Need help?
General
