EasyManuals Logo

jcb 8016 CTS User Manual

jcb 8016 CTS
208 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #87 background imageLoading...
Page #87 background image
Operation
Fire Extinguisher
75 9821/6100-4 75
Fire Extinguisher
General
Location
The fire extinguisher is located behind the seat and is held in position by a stowage bracket. Keep the fire
extinguisher in this position until you need to use it.
Operation
WARNING Do not use the fire extinguisher in a confined space. Make sure that the area is well ventilated
during and after using the fire extinguisher.
WARNING After any use, the extinguisher must be replaced or serviced.
Make sure that you understand how to use the fire extinguisher. If necessary, refer to the instructions found
on the fire extinguisher.
Only try to extinguish a fire if the circumstances permit and your safety is not endangered. If necessary, contact
your nearest fire department.
Using the fire extinguisher:
1. If the circumstances permit and your safety is not endangered, move the machine to a safe place to prevent
the fire from spreading.
2. Remove extinguisher from its stowage bracket.
3. Remove safety pin.
4. Aim directly at the fire from an upwind position, if possible.
5. Squeeze trigger to operate the extinguisher, release the trigger to stop the flow.
Figure 66.
B
A
A Safety pin B Trigger

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the jcb 8016 CTS and is the answer not in the manual?

jcb 8016 CTS Specifications

General IconGeneral
Brandjcb
Model8016 CTS
CategoryCompact Excavator
LanguageEnglish

Related product manuals