Technical Data
Fluids, Lubricants and Capacities
135 9831/7750-1 135
Fluids, Lubricants and Capacities
General
For: CT160 ............................................................................................................................. Page 135
For: CT260 ............................................................................................................................. Page 135
(For: CT160)
Table 25.
Item Capacity Fluid/Lubricant JCB Part Num-
ber
Container Size International
Specification
Fuel Tank 33 L Diesel - - Refer to 'Fuel'
Engine (Oil) 5.1 L JCB Engine Oil
EP 15W40
4001/1805 20 L API CH-4
Engine (Coolant) 3.1 L JCB Antifreeze
HP/Coolant-
Concentrate
4006/1120 20 L ASTM D6210
Hydraulic tank 41 L JCB HP Hy-
draulic Fluid 46
4002/0805 20 L -
Vibration system - JCB Special HP
Grease
4003/2017 0.4 kg -
Sprinkler system 100 L Water - - -
(For: CT260)
Table 26.
Item Capacity Fluid/Lubricant JCB Part Num-
ber
Container Size International
Specification
Fuel Tank 46 L Diesel - - Refer to 'Fuel'
Engine (Oil) 7 L JCB Engine Oil
EP 15W40
4001/1805 20 L API CH-4
Engine (Coolant) 5.5 L JCB Antifreeze
HP/Coolant-
Concentrate
4006/1120 20 L ASTM D6210
Hydraulic tank 60 L JCB HP Hy-
draulic Fluid 46
4002/0805 20 L -
Vibration system - JCB Special HP
Grease
4003/2017 0.4 kg -
Sprinkler system 197 L Water - - -
Fuel
Fuel Standards, Grades and Recommendations
Diesel fuels specified to EN590 or ASTM D975 are recommended.
• Since Kubota diesel engines of less than 56 kW (75 hp) utilize EPA Tier 4 and Interim tier 4 standards,
the use of low sulfur fuel or ultra low sulfur fuel is mandatory for these engines, when operated in US
EPA regulated areas. Therefore, use No.2-D S500 or S15 diesel fuel as an alternative to No.2-D, and use
No.1-D S500 or S15 diesel fuel as an alternative to No.1-D for below the specified ambient temperatures.
-10 °C ( 14.0 °F)
• No.2-D is a distillate fuel of lower voltility for engines in industrial and heavy mobile service. (SAE J313
JUN87)
Major Fuel Standards of the World
• ASTM : American Society of Testing and Materials