jcb G20 User Manual

Operation
Instruments
43 9831/0650-3 43
Load
These pages contain electrical values of the load, measured or derived from the module's voltage and current
inputs. The power values displayed depend on which supply is on load.
• Generator Current (A)Mains Current (A)Load ph-N (kW)Total Load (kW)Load ph-N (kVA)Total Load
(kVA)Load ph-N (kVAr)Total Load (kVAr)Power Factor ph-NPower Factor AverageAccumulated Load
(kWh, kVAh, kVArh)
Figure 28.
2
20
kW
20
kW
20
kW
L1
L2
L3
Engine
These pages contain instrumentation gathered about the engine measured or derived from the module's inputs,
some of which may be obtained from the engine ECU.
• Engine Speed
• Engine Run TimeEngine Battery VoltsEngine Coolant TemperatureEngine Oil PressureEngine Fuel Level/
Flexible SensorEngine Maintenance Due - OilEngine Maintenance Due - AirEngine Maintenance Due -
Fuel
Figure 29.
2
1500
RPM
Info
These pages contain information about the controller.
• Module's date and timeScheduler settingsProduct description and USB identification numberApplication
and Engine Version

jcb G20 Specifications

General

Brand	jcb
Model	G20
Category	Portable Generator
Language	English