16
SAR certication
When communicating over the wireless network, the mobile phone
emits low radio waves known as radio frequency energy or RF. The
Specic Absorption Rate or SAR is the unit used to measure the
amount of RF energy absorbed by the body while using the phone
and is expressed in watts/kilogram. In compliance with the product
standards in EN 50360:2001, the allowed limit of SAR averaged for
10g tissue is 2.0 (W/kg).
The localised SAR of the portable JCB™TOUGHPHONE™
device has been measured in all cases as requested by the relevant
international standards. The maximum localised SAR value for which
the device has been tested and certied for specic exposure limits
and different network bands is given below:
900 MHz Band
Min. measured SAR: 0.13
Max. measured SAR: 0.68
1800 MHz Band
Min. measured SAR: 0.08
Max. measured SAR: 0.15
You can reduce the exposure of the human body to RF energy by
keeping the phone at a distance from the head/body. For example, by
using a hands free headset.
To Next Page
Loading...
Need help?
General
