114
Message catalog
Message
Cause (Reason to display such messages)
1
A. When “start/stop”, “reverse stitch” or “thread-trimming” button is pressed
while the presser foot is raised.
B. When presser foot is raised while sewing.
2
A. When one of the buttonhole stitches is selected and the buttonhole sensor
pin is not connected, the machine starts to sew.
3
A. When a stitch pattern other than buttonholes is selected but the buttonhole
sensor pin is connected, the machine starts to sew.
4
A. When in the mode, user attempts to select stitch patterns more than
the maximum number of memory (70).
To Next Page
Loading...
Need help?
General
