65
Bartacking
Bartacking is used to reinforce the part of the seam that is likely to ravel.
* The length of the bartack is determined by pushing the reverse stitch button, but it will
automatically make a u-turn when it reaches the maximum of 20 stitches.
* If the presser foot cannot be parallel to throat plate, use ller fabric or cardboard.
Fabric
example of use
Trousers and skirt
Bag
Pocket
10 cm
Pass the needle thread through the presser foot.
Place the fabric under the presser foot.
Pattern No.
Practical 19
Practical 17
Presser foot
Manual buttonhole presser foot (I)
Attention
Turn off the power before replacing the presser foot.
2
1
F400 / F300
F600
To Next Page
Loading...
Need help?
General
