Automatic needle threader
Lower the presser foot.
* The automatic needle threader sometimes fails to thread the
needle when the presser foot is raised.
Thread to
A
and cut the thread with the thread
cutter.
26
Lower the threading lever until it comes to a complete stop.
* Lower the threading lever slowly.
Threading lever
A
Thread cutter
Release the threading lever and the needle thread is
threaded to the needle eye.
.
Pull the thread backward.
Pull out the thread from the needle eye by approx. 10 cm or 4 inches
long.
* Be careful that the cutter is inside.
1
2
3
4
To Next Page
Loading...
Need help?
General
