* The buttonhole length is automatically determined only by placing a
button on the buttonhole presser foot.
* The machine can sew buttonholes for buttons with diameters of 0.7
- 3.2 cm.
* In case of stretchy fabrics, use non-elastic interlining on the wrong
side of the fabric.
* Make sure to perform test sewing to see that the machine sews
buttonholes correctly.
* Buttonhole Nos. 09 - 12 are for knit fabrics and should be used with
a knit needle.
Pattern No.
Direct
Buttonhole 01, 02, 04~15
Presser foot Buttonhole presser foot (E)
Pattern number
Buttonhole type
0
Standard
buttonhole
Buttonhole for medium to heavy weight materials
Standard buttonhole
01
02
03
Stitch length is larger.
Buttonhole for heavy weight materials
Sews buttonhole double
Manual 2-step buttonhole
Use this buttonhole, when there is an overlapped
section in the fabric or when you want to sew
larger buttonhole than 3.2cm diameter. (Refer to
page 62)
Buttonhole stitches
Attention
Turn off the power before replacing the presser foot.
To Next Page
Loading...
Need help?
General
