62
Manual 2-step buttonhole
1
Set the manual buttonhole presser foot (I).
Pass the needle thread through the hole of the presser foot
and pull it out sideways together.
Bring down the needle on the sewing start point and lower the
presser foot.
Hole on the
presser foot
Needle thread
* Turn the “zigzag width” and “stitch length” adjusting dials before sewing when you want to change the buttonhole width
and density of the seam.
Pattern No.
Buttonhole 03
Presser foot Manual buttonhole presser foot (I)
Attention
Turn off the power before replacing the presser foot.
Sewing start point
To Next Page
Loading...
Need help?
General
