Lift the presser foot lifting lever.
1
2
3
4
5
It is impossible to perform stitching if the
needle is not correctly installed or a bent
needle is used. Pay close attention as this will
cause machine malfunction.
24
Threading the needle thread
* Use the needle: No.11-16
and the thread: No.30-90.
* When twin needle is used, the automatic
needle threader can not be used.
* Align the marking at the hand wheel with the one on the machine body.
Needle thread preparation
1
Note:
Make sure to push the needle to the top.
To Next Page
Loading...
Need help?
General
