To Next Page

To Previous Page

－

27. OPERATION SWITCHES

󰿿 󰿿󱀁 󱀀󱀂 󱀂󱀁

󰿿 One-touch type reverse feed switch

•Whilethemachineisinoperation,themachineperformsreversefeedstitchingaslongasthisswitchisheldpressed,and

resumes normal feed stitching when the switch is released.

󱀀 Alternating vertical movement amount change-over switch

•Ifthisswitchispressedtheamountofthealternatingverticalmovementofthewalkingfootandthepresserfootwillbemaxi-

mized. (The lamp locating inside the button will light up.) Use this switch when a multilayered portion of the sewing product is

not smoothly fed.

󱀁 Automatic reverse feed stitching cancellation/addition switch

•Ifthisswitchispressedwhenthefollowingautomaticreversefeedstitchinghasbeenspecied,thereverse stitching will not

take place (for once immediately after it is pressed). (Example 1)

•Ifthisswitchispressedwhennoautomaticreversefeedstitchinghasbeenspecied,thereversefeedstitchingwilltakeplace

(once immediately after it is pressed). (Example 2)

In the case where DL control is not provided. In the case where DL control is provided.

(Example1)Inthecasewherebothautomaticreversefeedstitchingforstartandthatforendhavebeenspecied:

If the switch is pressed before starting sewing, the auto-

matic reverse feed stitching for start (between A and B) will

not be carried out.

If the

switch is pressed during sewing, the automatic

reverse feed stitching for end (between C and D) will not

be carried out.

(Example2)Inthecasewhereneitherautomaticreversefeedstitchingforstartnorthatforendhavebeenspecied:

If the switch is pressed before starting sewing, the au-

tomatic reverse feed stitching for start (between A and B)

will be carried out.

If the switch is pressed during sewing, the automatic

reverse feed stitching for end (between C and D) will be

carried out.

JUKI LU-2210N-6 User Manual

Questions and Answers: