−40 −
9. HOW TO USE THE SIMPLIFIED PROGRAM FUNCTION
(1) Simplified program function
SC-510 does not use the exclusive input device or the like and has the function that can create the simplified
programs which take in the signals from the outside, output the signals to the outside, and control the
sewing machine head by SC-510 main unit only.
1. Specifications
1) It is possible to simultaneously perform the operation of four programs.
2) It is possible to input 20 steps per program.
3) It is possible to perform the cross operation among four programs.
2. Indication and function
1) Indication when the simplified program is selected
2) Indication when the program is selected
Indication
Pro_
_End
Pro1
Pro2
Pro3
Pro4
Function
Indicates program selection mode.
Ends program input function.
Selects program 1.
Selects program 2.
Selects program 3.
Selects program 4.
Remarks
Indication
66
Pro
Function
Setting function No.
Indication of program input mode.
Remarks
Indication
_oFF
_on
CHE_
Pro_
Function
Stops program operation.
Makes valid program operation.
Can confirm contents of program.
Starts input mode of program.
Remarks
Possible to select only when 3-digit LED indication is *.0
Possible to select only when 3-digit LED indication is *.0
Possible to select only when 3-digit LED indication is *.0
Possible to select only when 3-digit LED indication is *.0
Indication
0
1 to 20
Function
Operation mode selection
Program step No.
Remarks
Refer to the aforementioned list.
Indication
1
2
3
4
Function
Inputting program 1.
Inputting program 2.
Inputting program 3.
Inputting program 4.
Remarks
To Next Page
Loading...
Need help?
General
