application-services {
utm-policy policy-utm-all;
}
}
}
}
If you are done configuring the device, enter commit from configuration mode.
Verification
Confirm that the configuration is working properly.
•
Verifying Web Filtering Status on page 53
•
Verifying Antispam Status on page 53
•
Verifying Antivirus Protection on page 53
Verifying Web Filtering Status
Purpose Verify that the Web filtering status configuration is working properly.
Action From operational mode, enter the show security utm web-filtering status command.
user@srx210-host# show security utm web-filtering status
UTM web-filtering status:
Server status: SC-CPA server up
Verifying Antispam Status
Purpose Verify that the antispam filtering configuration is active.
Action From operational mode, enter the show security utm anti-spam status command.
user@srx210-host>show security utm anti-spam status
SBL Whitelist Server:
SBL Blacklist Server:
msgsecurity.example.net
DNS Server:
Primary : 208.67.222.222, Src Interface: ge-0/0/0
Secondary: 208.67.220.220, Src Interface: ge-0/0/1
Ternary : 10.189.132.70, Src Interface: fe-0/0/2
Verifying Antivirus Protection
Purpose Verify that the antivirus protection configuration is working properly.
Action From operational mode, enter the show security utm anti-virus status command.
user@srx210-host>show security utm anti-virus status
UTM anti-virus status:
Anti-virus key expire date: 2010-12-31 00:00:00
Update server: http://update.juniper-updates.net/AV/SRX210
53Copyright © 2016, Juniper Networks, Inc.
Chapter 8: Configuring UTM for Branch SRX Series
To Next Page
Loading...
Need help?
General
