OK/FAIL LED, one bicolor
•
Off–One or more of the following conditions apply:
•
The services gateway is not powered on.
•
The services gateway is still in the process of either booting or shutting down.
•
The services gateway is not configured for chassis clustering.
•
Steady Green–The services gateway is configured for chassis clustering, and the SCM is
operating normally.
•
Blinking Green–The SCM is initializing (preparing to come online) or is preparing to go offline.
•
Red–The SCM has failed and is not operating normally.
LEDs
The serial number label is located as shown in Figure 16 on page 21).
Figure 16: SCM Serial Number Label
g036108
Serial number label
Serial Number
Location
Related
Documentation
SRX1400, SRX3400, and SRX3600 Services Gateway Module Overview on page 2•
• Modules Supported on SRX1400, SRX3400, and SRX3600 Services Gateways on
page 3
• Eligible Slots for SRX1400, SRX3400, and SRX3600 Services Gateway Modules on
page 4
• Installing Common Form Factor Modules In SRX1400, SRX3400, and SRX3600 Services
Gateways on page 22
21Copyright © 2016, Juniper Networks, Inc.
SRX Clustering Module SRX3K-CRM
To Next Page
Loading...
Need help?
General
