Tint
For adjusting the hue of the video image.
0
Setting range: -50 (reddish) to +50 (greenish)
* Adjustment cannot be made when “Color Profile” is set to “x.v.Color”.
Input Signal
Input Level
For setting the dynamic range (gradation) of the video input.
0
If the dynamic range is not appropriate, the bright areas become overexposed, and the dark areas become
underexposed.
Setting Description
Auto Sets the input signal level automatically.
Standard Select this setting if you are inputting video signals (dynamic range: 16 - 235).
Enhanced Select this setting if you are inputting PC signals (dynamic range: 0 - 255).
Super White Select this setting when inputting Super White-compatible device signals (dynamic
range: 16 - 255).
* When Picture Mode is set to “THX”, the setting is fixed at “Super White”.
Color Space
For setting the color space of the input signal.
Setting Description
Auto Detects “YCbCr(4:4:4)”, “YCbCr(4:2:2)”, and “RGB” automatically.
YCbCr(4:4:4) Select this setting when inputting YCbCr(4:4:4) video signals.
YCbCr(4:2:2) Select this setting when inputting YCbCr(4:2:2) video signals.
RGB Select this setting when inputting RGB video signals.
* The color space setting is YCbCr(4:2:0) during 3840×2160/50 Hz, 3840×2160/60 Hz input.
Control with HDMI (CEC)
For setting the HDMI link function.
0
Setting to “On” enables this unit to be operated via operation on the connected device, such as power on/off and
switching of input.
50
Adjust/Set
To Next Page
Loading...
Need help?
General
