Aspect
The screen size of the projected image can be adjusted optimally according to the original screen size (aspect) that
has been input.
Æ “Adjusting the Screen Size (Aspect)” （p. 31）
Progressive
For converting the interpolation setting of the interlaced signals.
Setting Description
Auto Performs interpolation by automatically detecting whether the interlaced signals
are converted from 24p video images, such as those in film movies, or interlaced
signals of video materials.
Off Interpolates video images as interlaced signals of video materials, etc.
Mask
For hiding the peripheral area of the image with a mask (black strip).
Setting Description
Off Not masked.
2.5% Masks about 2.5% of the peripheral area of the image.
5% Masks about 5.0% of the peripheral area of the image.
Custom Masks about 0% to 5% of the four sides of the image.
3D Setting
For setting 3D movies for viewing.
Æ “Viewing 3D Movies” （p. 32）
Picture Position (Horiz./Vert.)
Adjust the position if the edges of the image are partially missing due to the timing of horizontal and vertical
synchronization signals.
* Adjustment cannot be made during 3D signal input.
Mask: black strip around the periphery
On
Off
51
Adjust/Set
To Next Page
Loading...
Need help?
General
