JVC GY-HM600U Instructions

Managing/Editing Clips on
a PC
Loading Clips to the PC (USB
Connection Mode)
0
You can load clips to a PC by connecting the
camera recorder to the PC via the USB port.
Doing so enables clips stored in the SD card to
be managed and edited on the PC.
0
Files
on the SD card can be managed/edited on
the connected PC in this mode only for USB
mass storage class devices that are recognized
by the said PC as a peripheral drive.
Memo :
0
Files cannot be written to the SD card.
0
Make sure to manage/edit files recorded in the
MP4 file format using the (JVC ProHD Clip
Manager) PC application software in the
supplied disc.
0
For details on how to install the application
software, refer to the
[User's Guide] of the [JVC
ProHD Clip Manager] inside the supplied disc.
1
Connect the camera recorder to the PC
using a USB cable.
A confirmation message “Change to USB
Mode?”
to enable the USB connection appears.
.
AUX
INPUT2
INPUT1
DEVICE
AV
A
BATT.RE L EASE
POWER
/CHG
B
HDMI
REMOTE
DC
HD/SD
SDI
REC
AV
DEVICE
PC
2
Select [Change] using the cross-shaped
button (JK), and press the Set button (R).
The camera recorder switches to USB mode.
.
2
Memo :
0
If recording is in progress, the “Change to USB
Mode?” message appears after recording
stops.
0
If playback is in progress, the camera recorder
switches to USB mode after the file closes
automatically, such as when playback stops.
Disconnecting
0
Disable
the connection on the PC, then remove
the USB cable from the camera recorder.
0
Doing so exits the USB mode and switches the
camera recorder to Camera mode.
Memo :
0
The
procedure for disabling the USB connection
varies according to the PC in use. For details,
refer to the instruction manual of the PC.
132
Connecting External Devices

JVC GY-HM600U Specifications

General

Brand	JVC
Model	GY-HM600U
Category	Camcorder
Language	English