JVC GY-HM600U Instructions

Switching the SD cards
When both card slots are inserted with SD cards,
you can use the
[SLOT A/B] button to switch the
card to use.
When the memory on an SD card is full during
recording, data recording automatically switches to
the other card.
.
AE LEVEL
MENU/THUMB
CANCEL
MENU/THUMB
CANCEL
SLOT
A/B
Memo :
0
The [SLOT A/B] button is disabled during
recording or playback. Cards will not be
switched even if you press the button.
Formatting (Initializing) SD Cards
When the following cards are inserted, [!FORMAT]
appears at the remaining media display area.
Format the card using the camera recorder menu.
0
Unformatted SD cards
0
SD cards formatted under different
specifications
* For
details of the menu operation, refer to “[Basic
Operations in Menu Screen] P 90”.
Caution :
0
Be sure to format the SD card on this camera
recorder.
SD cards formatted on a PC and other
peripheral equipment cannot be used on this
camera recorder.
0
[!RESTORE] appears at the remaining media
display area when an SD card that requires
restoring is inserted.
1
Select [System] B [Media] B [Format
Media]
.
(A P
110 [ Format Media ] )
2
Select the slot of the SD card to be
formatted and press the Set button (R).
.
2
3
The status of the selected SD card appears.
4
Select [Format] and press the Set button
(R).
.
4
5
Formatting starts.
.
39
Preparations

JVC GY-HM600U Specifications

General

Brand	JVC
Model	GY-HM600U
Category	Camcorder
Language	English