JVC HR-A637E User Manual

EN 25
SELECT NEW POSITION
2
Press PUSH JOG%
fi
to move the station to the new
channel position, then press OK.
Example: If you moved the station in position 3 to
position 7, the stations originally in positions 4–7 each
move up one position.
● Repeat steps 1 and 2 as necessary.
RETURN TO NORMAL
DISPLAY
3
Press CH SET.
Perform steps 1 and 2 of “Storing Channels Manually” on
page 24 to access the Confirmation display before continuing.
Set Stations (A)
SELECT ITEM
1
Press PUSH JOG%fi until the item you want is
displayed. Then press OK twice and the station’s name
(or “– –”) begins blinking.
SELECT NEW STATION
2
Press PUSH JOG
%fi
until the new station’s name you
want to store begins blinking.
Registered station names (Z pg. 26) appear as you
press PUSH JOG
%
fi.
SWITCH STATIONS
3
Press OK.
● Repeat steps 1 through 3 as necessary.
RETURN TO NORMAL
DISPLAY
4
Press CH SET.
Set Stations (B)
NOTE:
First perform step 1 of the above procedure.
SELECT STATION NAME
CHARACTER
2
Press PUSH JOG and the first letter of the station
name (or “
–
”) begins blinking.
ENTER NEW CHARACTER
3
Press PUSH JOG
%
fi to cycle through the characters
(A–Z, 0–9, –,
*
, +, (space)) and stop when the
desired one is indicated, then press PUSH JOG to
enter. Enter the remaining characters the same way
(maximum of 4).
After entering all characters, press OK.
● Repeat steps 1 through 3 as necessary.
● If you make a mistake, press PUSH JOG until the
incorrect character begins blinking. Then enter the
correct character by pressing PUSH JOG%
fi
.
RETURN TO NORMAL
DISPLAY
4
Press CH SET.
]
%
%
%
Fine-Tuning Channels
Already Stored
SELECT CHANNEL TO
FINE-TUNE
1
Press PUSH JOG%
fi
until the channel you want to tune
is displayed.
ACCESS MANUAL CH. SET
DISPLAY
2
Press OK three times. The Manual Ch. Set display
appears.
● “OFF” (decoder setting) appears only with A637EH.
PERFORM TUNING
3
Press PUSH JOG
%
fi until the picture is its clearest.
Then press OK.
● The Confirmation display appears.
● Repeat steps 1 through 3 as necessary.
RETURN TO NORMAL
DISPLAY
4
Press CH SET.
%

JVC HR-A637E Specifications

Power

power requirement	AC 220 – 240 V, 50/60 Hz
power consumption	24 W

Operating Environment

operating temperature	5°C to 40°C
storage temperature	–20°C to 60°C
operating position	Horizontal only

Video/Audio

signal system	PAL-type colour signal and CCIR monochrome signal, 625 lines/50 fields
signal-to-noise ratio	45 dB
horizontal resolution	250 lines

Tuner/Timer

tv channel storage capacity	99 positions
channel coverage	VHF 47 – 89/104 – 300/302 – 470MHz, UHF 470 – 862MHz
aerial output	UHF channel 36 (Adjustable 32 – 40)

Weight and Dimensions

dimensions	400 x 94 x 338 mm
weight	4.3 kg