ENGLISH 5
BASICSBASICS
Component names and functions
VCaution on the volume setting:
Digital devices produce very little noise compared
with other sources. Lower the volume before
playing these digital sources to avoid damaging
the speakers by sudden increase of the output
level.
KW-V230BT
1 Reset button
Resets the unit. (Page 3)
2 Loading slot
3 M (Eject) button
Ejects the disc. (Press) (Page 13)
4 Volume +/– button
Adjusts the audio volume. (Page 7)
5 USB input terminal (Page 81)
6 Monitor panel
7 Screen (touch panel)
8 button
• Switches the screen. (Press)
– The screen switched to depends on the
<Navigation Input> setting. (Page72)
• Turns off the screen. (Hold) (Page 7)
• Turns on the screen. (Hold) (Page 7)
9 HOME/ button
• Displays the Home screen. (Press) (Page 9)
• Turns on the power. (Press) (Page 6)
• Turns off the power. (Hold) (Page 6)
p FNC/ button
• Pops up the short-cut menu. (Press)
(Page 12)
• Activates the voice dialing. (Hold) (Page 58)
q EQ button
Displays the <Equalizer> screen. (Page 62)
INITIAL SETTINGSINITIAL SETTINGS
5 Set the clock time.
<Radio Data
System>
Synchronizes the clock time with
FM RBDS.
<OFF> Sets the clock manually. (See
below.)
When selecting <OFF>:
Adjust the hour (1), then adjust the minute (2).
• Press [Reset] to set the minute to “00”.
6 Finish the procedure.
Continued on the next page...
2017KW-VEntryK.indb52017KW-VEntryK.indb5 2016/12/0915:112016/12/0915:11
To Next Page
Loading...
Need help?
General
Weight and Dimensions
