16
Operation
Operation
Starting up the projector
1. Plug the power cable into the projector and a power outlet.
Turn on the power outlet switch (where fitted). The POWER
indicator light on the projector lights orange after power
has been applied.
Please use the supplied power cable to avoid possible dangers such
as electric shock and fire.
2. Press to start the projector. The POWER indicator light
flashes green and stays green when the projector is on.
The fans start operating, and a start-up image displays on
the screen while it warms up. The projector does not respond to further commands while it is
warming up.
Shutting down the projector
1. Press . The projector displays a shutdown confirmation message.
2. Press a second time.
The POWER indicator light flashes
orange and the fans run for about two minutes to cool the
lamp. The projector doesn’t respond to any commands
during the cooling process.
3. When the cooling process ends, the POWER indicator light
will show a solid orange.
If the projector will not be used for an extended period,
unplug the power cable from the power outlet.
Avoid turning on the projector immediately after turning it off as excessive heat may shorten lamp life. The
actual lamp life may vary due to different environmental conditions and usage.
To Next Page
Loading...
Need help?
General
