25
Menu Functions
SOURCE menu
Digital Zoom
Allows you to magnify the image and find the details on it:
1. Press ENTER to display the Zoom bar.
2. Press repeatedly to magnify the projected image to your desired
size.
3. To navigate the image, press ENTER to switch to the panning mode
and use the directional arrows ( / / / ) to navigate it. The image
can only be navigated after it is magnified. You can further magnify it
while searching for details.
4. To reduce the image size, press ENTER to switch back to the zoom in/
out functionality, and press AUTO to restore the image to its original
size. You can also press repeatedly until it is restored to the original
size.
The function is accessible through the remote control.
3D
This projector supports playing three-dimensional (3D) content transferred
through your 3D-compatible video devices and contents, such as PlayStation
consoles (with 3D game discs), 3D Blu-ray players (with 3D Blu-ray discs), 3D
TV (with 3D channel), and so on. After you have connected the 3D video
devices to the projector, wear the DLP link 3D glasses and make sure the
power is on to view 3D contents.
When watching 3D contents,
• the image may seem misplaced, however, this is not a product malfunction.
• take appropriate breaks when watching 3D content.
• stop watching 3D content if you feel fatigue or discomfort.
• keep a distance from the screen of about three times the effective height of
the screen when watching 3D content.
• children and people with a history of oversensitivity to light, heart
problems, or have any other existing medical condition should be refrained
from watching 3D content.
The default setting is Auto and the projector automatically chooses an
appropriate 3D format when detecting 3D contents. If the projector cannot
recognize the 3D format, manually choose a 3D mode according to your
preference.
When this function is enabled:
• the brightness level of the projected image decreases.
• the Picture Mode cannot be adjusted.
• the Vertical Keystone can only be adjusted within limited degrees.
3D Sync
When your 3D image is distorted, enable this function to switch between the
image for the left eye and the right eye for more comfortable 3D viewing
experience.
Submenu Functions and Descriptions
Quick Auto Search
Sets whether the projector searches automatically for input sources.
Select On to enable the projector to scan for input sources until it
acquires a signal. If the function is set to Off, the projector will select the
last used input source.
To Next Page
Loading...
Need help?
General
