26
Menu Functions
SYSTEM SETUP: Basic menu
HDMI Setting
• Auto: Sets the projector to detect the HDMI range of the input
signal automatically.
• Full: Sets the HDMI color range as 0 - 255.
• Limited: Sets the HDMI color range as 15 - 235.
Audio Settings
• Mute
Select On to temporarily turn off the projector's internal speaker or the
volume being output from the audio output jack.
To restore the audio, select Off.
The function is accessible through the remote control.
• Volume
Adjusts the volume level of the projector's internal speaker or the volume
being output from the audio output jack.
The function is accessible through the remote control.
If the Mute function is activated, adjusting Volume will turn off the Mute
function.
• Microphone Volume
Adjusts the microphone input volume.
Position
Displays the Position window. You may use the directional arrow keys
on the projector or remote control to adjust the position of the projected
picture.
The values shown on the lower position of the window change with every
key press you made.
This function is only available when the PC signal is selected.
Phase
Adjusts the clock phase to reduce picture distortion.
This function is only available when the PC signal is selected.
H. Size
Adjusts the horizontal width of the picture.
This function is only available when the PC signal is selected.
Submenu Functions and Descriptions
Menu Settings
• Menu Display Time
Sets the length of time the OSD will remain active after your last key
press.
• Menu Position
Sets the OSD menu position.
Language
Sets the language for the On-Screen Display (OSD) menus.
To Next Page
Loading...
Need help?
General
