6
Important safety instructions
Moisture condensation
Never operate the projector immediately after moving it from a cold location to a hot location.
When the projector is exposed to such a change in temperature, moisture may condense on the
crucial internal parts. To prevent the projector from possible damage, do not use the projector for
at least 2 hours when there is a sudden change in temperature.
Avoid volatile liquids
Do not use volatile liquids, such as insecticide or certain types of cleaner, near the projector. Do
not have rubber or plastic products touching the projector for a long time. They will leave marks
on the finish. If cleaning with a chemically treated cloth, be sure to follow the cleaning product’s
safety instructions.
Disposal
This product contains the following materials which are harmful to human bodies and
environment.
• Lead, which is contained in solder.
• Mercury, which is used in the lamp.
To dispose of the product or used lamps, consult your local environment authorities for
regulations.
To Next Page
Loading...
Need help?
General
