JVC NX-MD1 User Manual

– 20 –
Continued
2 Press PTY.
“PTY SELECT” starts flashing in the main display.
3 Press PTY SELECT + or – to select a PTY code
while “PTY SELECT” is flashing.
• Each time you press the button, the PTY codes
change as follows (refer also to the list on page 22):
None “News “ Affairs “ Info “
Sport “ Educate “ Drama “ Culture “
Science “ Varied “ Pop M “ Rock M “
Easy M “ Light M “ Classics “
Other M “ Weather “ Finance “ Children “
Social “ Religion “ Phone In “ Travel “
Leisure “ Jazz “ Country “ Nation M “
Oldies “ Folk M “ Document “ TEST “
Alarm! “ (back to the beginning)
4 Press PTY again.
While searching, the selected PTY code appears and
“SEARCH” flashes in the main display.
The unit searches 30 preset FM stations, and stops
when it finds the one you have selected, and tunes into
that station.
To continue searching after the first stop
Press PTY again while the indications in the main display
are flashing. If no program is found, “NOT FOUND”
appears in the main display and the unit returns to the last
received station.
To stop searching any time during the process
Press PTY while searching.
Ex. When “Info” is selected
EON data type
indicators
Switching to a Program Type of Your Choice
Temporarily
The EON function allows the unit to switch temporarily to
a broadcast program of your choice (TA, News, and/or
Info) from a different station except when you are listening
to a non-RDS station—some FM stations and AM (MW/
LW) stations.
• This function only works while receiving a preset RDS
station sending the EON data (the RDS and EON
indicators light while receiving such a station).
• EON function is applicable only to the preset stations.
On the remote control ONLY:
1 Press RDS CONTROL while listening to an FM
station.
2 Press EON (PLAY MODE).
The EON data type selected previously
—TA/News/Info—lights up on the display.
3 Press TA/News/Info (REPEAT) repeatedly until the
EON data type you want is selected.
TA : Traffic announcement
News :News
Info : Programs the purpose of which is to impart
advice in the widest sense.
• Each time you press the button, the EON data types
change as follows:
TA = News = Info = TA News =
News Info = TA Info = TA News Info =
(back to the beginning)
The indicator(s) corresponding to the selected EON
data type lights up on the display.
To cancel the EON function, press EON (PLAY MODE)
again so that the TA/News/Info indicator goes off.
• If you cancel the EON function while receiving a
program selected by the EON function, the unit goes
back to the previously tuned station.
RECORDING
EN16-22_CA-NXMD1R[B]f.pm6 01.8.20, 11:3420

JVC NX-MD1 Specifications

General

Brand	JVC
Model	NX-MD1
Category	Speaker System
Language	English