JVC NX-MD1 User Manual

– 54 –
Continued
2 Press MD TITLE/EDIT repeatedly until
“UNGR ALL?” appears in the main display.
• If the loaded MD has no group, “UNGR ALL?” will
not appear.
• If you want to stop this editing process, press
ENTER.
3 Press SET.
4 Press ENTER.
“EDITING” appears in the main display for a while,
then “WRITING” flashes while the editing you have
made is being recorded on the MD.
Erasing Tracks in a Group—ERASE GR
This function allows you to erase a group together with
tracks in the group.
You cannot resume the tracks in the erased group.
Once a group is erased, the other tracks and groups are
renumbered.
• To stop any time during the editing process after step
3 ,
press MD TITLE/EDIT.
On the remote control ONLY:
In the following example, the process is explained from the
very first—that is, inserting a disc. You can also edit an MD
during playback (in Normal play mode).
1 Insert an MD you want to edit into the MD loading
slot while the unit is turned on.
• If the GROUP indicator is not lit on the display, press
GROUP to activate this function.
2 Press MD TITLE/EDIT repeatedly until “ERASE
GR?” appears in the main display.
• If the loaded MD has no group, “ERASE GR?” will
not appear.
• If you want to stop this editing process, press
ENTER.
3 Press SET.
• During playback:
The group number of the current track will appear. If
the track does not belong to any groups, group
number will be indicated by “– –.”
4 Press GROUP or to select the group you
want to erase.
• During playback:
The tracks in the selected group are played back
repeatedly.
5 Press SET.
• To cancel the setting, press CANCEL, then repeat
step
4 .
6 Press ENTER.
“EDITING” appears in the main display for a while,
then “WRITING” flashes while the editing you have
made is being recorded on the MD.
Ex. When the group 3 is selected
EN45-59_CA-NXMD1R[B]f.pm6 01.8.20, 11:3554

JVC NX-MD1 Specifications

General

Brand	JVC
Model	NX-MD1
Category	Speaker System
Language	English