JVC NX-MD1 User Manual

– 51 –
Joining Two Groups—JOIN GR
This function allows you to join two adjacent groups into a
single group.
When the groups have each title, the title of the preceding
group is reassigned to the joined group.
Once two groups are joined, the other groups are
renumbered.
• To stop any time during the editing process after step
3 ,
press MD TITLE/EDIT.
On the remote control ONLY:
In the following example, the process is explained from the
very first—that is, inserting a disc. You can also edit an MD
during playback (in Normal play mode).
1 Insert an MD you want to edit into the MD loading
slot while the unit is turned on.
• If the GROUP indicator is not lit on the display, press
GROUP to activate this function.
2 Press MD TITLE/EDIT repeatedly until “JOIN
GR?” appears in the main display.
• If the loaded MD has one or no group, “JOIN GR?”
will not appear.
• If you want to stop this editing process, press
ENTER.
3 Press SET.
• During playback:
The group number of the current track will appear. If
the track does not belong to any groups, group
number will be indicated by “– –.”
4 Press GROUP or to select the two
adjacent groups you want to join.
• During playback:
The tracks in the selected group are played back
repeatedly.
5 Press SET.
• To cancel the setting, press CANCEL, then repeat
step
4 .
6 Press ENTER.
“EDITING” appears in the main display for a while,
then “WRITING” flashes while the editing you have
made is being recorded on the MD.
To divide the group again, see the DIVIDE GR function
on page 50.
When “CANNOT JOIN” appears in the main
display
You are trying to join two groups with a track(s) in-between. In
this case, you need to move the group or the track.
Ex. When the groups 2 and 3 are selected
EN45-59_CA-NXMD1R[B]f.pm6 01.8.20, 11:3451

JVC NX-MD1 Specifications

General

Brand	JVC
Model	NX-MD1
Category	Speaker System
Language	English