– 50 –
Dividing a Group—DIVIDE GR
This function allows you to divide one group into two
separate groups.
You cannot divide the group containing a single track.
When the original group has a title, two separate groups are
reassigned the same title as the original group.
Once a new group is divided, the other groups are
renumbered.
• To stop any time during the editing process after step
3
,
press MD TITLE/EDIT.
On the remote control ONLY:
In the following example, the process is explained from the
very first—that is, inserting a disc. You can also edit an MD
during playback (in Normal play mode).
1
Insert an MD you want to edit into the MD loading
slot while the unit is turned on.
• If the GROUP indicator is not lit on the display, press
GROUP to activate this function.
2
Press MD TITLE/EDIT repeatedly until “DIVIDE
GR?” appears in the main display.
• If the loaded MD has no groups, “DIVIDE GR?” will
not appear.
• If you want to stop this editing process, press
ENTER.
3
Press SET.
• During playback:
The current track number and its group number will
appear. If the track does not belong to any groups,
group number will be indicated by “– –.”
4
Press GROUP or to select the group you
want to divide.
• During playback:
The tracks in the selected group are played back
repeatedly.
Ex. When track 1 is selected
5
Press ¡/¢ or 4/1 to select the track as the
dividing point.
• You can select the track using number buttons. In this
case, the selected track starts playback repeatedly.
• During playback:
The selected track starts playback repeatedly.
• When “TRK OK?=SET” does not appear in the
main display, you cannot go to the next step. Select
another track.
• The track selected in this step will be the first track in
the divided group.
• You cannot select the first track in a group as the
dividing point.
6
Press SET.
• To cancel the setting, press CANCEL, then repeat
step
4
.
7
Press ENTER.
“EDITING” appears in the main display for a while,
then “WRITING” flashes while the editing you have
made is being recorded on the MD.
To join the divided groups again, see the JOIN GR
function on page 51.
Ex. When track 6 is selected
Continued
EN45-59_CA-NXMD1R[B]f.pm6 01.8.20, 11:3450
To Next Page
Loading...
Need help?
General
