– 62 –
Available Symbols are as follows:
You can assign titles during playback or recording
• During play:
– Entering a disc title
The MD recorder repeats playback of all the tracks of the MD
until you press ENTER in step
6
. When you press ENTER, the
MD recorder enters the track title entry mode.
– Entering a track title
The MD recorder repeats playback of the current track until
you press ENTER in step
6
. When you press ENTER, the next
track will be played.
– Entering a group title
The MD recorder repeats playback of the tracks in the group
until you press ENTER in step
6
. When you press ENTER, the
MD recorder enters the next group title entry mode.
• During recording:
The MD recorder continues recording even after you press
ENTER in step
6
. (When assigning a disc title, the MD recorder
enters the track title entry mode.) If you do not press ENTER
before recording ends, the assigned title will be canceled.
• During CD Synchronized Recording (see page 42):
You can assign the disc title, and 16 titles for the tracks one after
another as recording goes on. The track titles you have entered
are automatically assigned to the tracks recorded on the MD in
sequential order. If you enter more titles than the tracks on the
recorded CD, they are ignored.
When you unplug the AC power cord or if a power
failure occurs before step
8
The editing you have made is not recorded on the MD.
2) Press the character entry button for a character
you want to input.
Examples:
• To input an “A” or “a,” press ABC once.
To input a “B” or “b,” press ABC twice.
To input a “C” or “c,” press ABC three times.
• To input a symbol, press MARK repeatedly until
the mark you want appears.
• To input a numeral, press 0 – 9.
• To enter a space while entering a title, press
twice.
• To move the character entry position while
entering a title, press
or .
• If you have entered an incorrect character, press
CANCEL to cancel the last entry.
3) Repeat steps
5
– 1) and
5
– 2) to input other
characters.
• If the character you want to input next is assigned
to the same button you have just pressed in step
5
– 2), press first to move the character entry
position to the right.
• The main display can only show 6 characters at a
time. If you enter the 7th character, the first
character disappears, and so on.
6
Press ENTER.
The next title entry screen appears.
• For the disc title:
The track title entry screen for the track 1 appears.
•
For the track title:
The next track title entry screen appears or the same
screen still remains.
•
For the group title:
The next group title entry screen appears or the same
screen still remains.
If you want to go on assigning a name, repeat steps
3
to
6
.
7
Press ENTER to exit from the title entry mode.
• When recording, do not go to the next step until the
recording ends.
8
Press 0 MD on the unit to eject the MD.
“WRITING” flashes while the editing you have made
is being recorded on the MD.
• If you press STANDBY/ON
instead of 0 MD,
“WRITING” will flash while the editing, then the
unit will be turned off (on standby.)
(Blank)
Continued
EN60-63_CA-NXMD1R[B]f.pm6 01.8.20, 11:3562
To Next Page
Loading...
Need help?
General
