KEB 00F6P00-3000 User Manual

6.10 Work list
Inverter parameter
Operator parameter
Parameter saving
Up/Download
Work list
File operations
FTP mode
Enter test mode
ENTER opens the submenu for the worklist.
The selection of a work list of the ash memory occurs in this
menu item.
Parameter lists, created with COMBIVIS in .wr5 format can be
transmitted via ftp to the operator.
The compilation of the work list must be done with
COMBIVIS.
Parameters from other Cfg IDs (for example, operator
parameter in complete lists) are displayed as “invalid
address FFFFh”.
Figure 20: Work list
6.11 File operations
Inverter parameter
Operator parameter
Parameter saving
Up/Download
Work list
File operations
FTP mode
Enter test mode
ENTER opens the submenu for the file operations.
F1 : Back to the main menu
ENTER: Display of le name / size / date / time / access level.
Since there is no real-time clock integrated in the operator, new
created les have the date 2003-01-01.
F4 : Delete the le
To delete or to rename a le, the current access level
must be higher or equal to the le level. The current
level is determined via the operator password or spe-
cied when using KebFTP upon connection.
From KebFTP 1.5.0.0, the current access level is dis-
played when selecting a drive and the le level when
selecting a le.
Deleted les are automatically cleared in the back-
ground.
Figure 21: File operations
38
NAVIGATION

KEB 00F6P00-3000 Specifications

General

Brand	KEB
Model	00F6P00-3000
Category	DC Drives
Language	English