Keba KeControl CP 507/C User Manual

CP 503/A, CP 505/A,D,K, CP 507/
A,C
Operating behavior
Project engineering manual V1.06
59
© KEBA 2021
STOP
Displayed state
(continue with short key press)
Action
(execute with long key press)
The controller is in the STOP state. Go to action: start application
Start application The controller goes to RUN state.
Stop controller The controller is stopped.
Trigger restart A restart is performed.
Reboot controller
A reboot of the controller is per-
formed.
IP-Show address
The IP address is displayed 3 times
in a row and each digit for 1 s.
Write status report The status report is written.
Write sys status report The SysStatus report is written.
Crashreport copy
The crash report is copied to the
root directory of the plugged USB
stick. The process may take some
time.
Error while copying the data (e.g.
USB stick disconnected during
copying, no space left on USB stick
etc.). The error must be confirmed
by a long keystroke.
Copy last status report
The last status report is copied to
the root directory of the plugged
USB stick. The process may take
some time.
Error while copying the data (e.g.
USB stick disconnected during
copying, no space left on USB stick
etc.). The error must be confirmed
by a long keystroke.
Copy last SysStatus report
The last SysStatusreport is copied
to the root directory of the plugged
USB stick. The process may take
some time.
Error while copying data (e.g. USB
stick disconnected during copying,
no space left on USB stick, etc.).
The error must be confirmed by a
long keystroke.

Keba KeControl CP 507/C Specifications

General

Brand	Keba
Model	KeControl CP 507/C
Category	Computer Hardware
Language	English