Keebox IPC1000W User Manual

Configuration – Using the web-based configuration interface
59
Wireless
• Connection Mode: Infrastructure is a wireless connection using an access point as a transmission point of all wireless devices. Ad-Hoc is a
wireless connection used without an access point, where your IPC1000W/IPC1000WI is directly connected to your PC. This is done using
the on-board wireless adapter on the IPC1000W/IPC1000WI connected to a wireless adapter on the PC.
• SSID: Service Set Identifier. This is an identifier for your network. Manually enter the SSID of your wireless network or select it from the drop
down menu. You can click Site Survey to see a list of wireless networks within range and further details of their settings.
• Wireless Channel: When using Infrastructure mode, the channel is specified by the access point and the channel will not be selectable on
this menu. When using Ad-Hoc mode, you can specify on which channel you want to communicate with the camera.
• Encryption Type: It is highly recommended that you encrypt the connection. In Infrastructure mode, select an encryption type and enter
details where applicable as you have specified on the access point. If you intend to use Ad-Hoc mode, you can specify here the encryption
type and preshared key that you want to use to connect from the PC.

Keebox IPC1000W Specifications

General

Brand	Keebox
Model	IPC1000W
Category	IP Camera
Language	English