Configuration – Using the web-based configuration interface
64
Upload
On this screen you can enter details of an FTP
Server that you want to upload images from
the camera to.
• Host Address: The IP address of the
FTP Server
• Port Number: The port number to
connect to the FTP on. The default is
port 21.
• User Name: The user name of the FTP
account.
• Password: The password for the user
account on the FTP.
• Directory Path: The path you want the
files to be uploaded to on the FTP.
• Passive Mode: If the camera is behind
a firewall, you might wish to enable
Passive mode to allow the camera to
upload the pictures.
• Time Schedule: Check Enable upload
image to FTP server to enable the
Upload function.
o Always: Selecting this option
allows snapshots to be
uploaded to your FTP as soon as you click Save.
o Schedule: Selecting this option allows you to configure specific times when you want the snapshots to be uploaded to your FTP
server.
o Motion Detection: Selecting this option sets the camera to upload images upon detection of motion.
o Manual Operation: Selecting this option means the user is responsible for taking a snapshot from the camera to upload.
To Next Page
Loading...
Need help?
General