2: Front-panel overview Model 2470 High Voltage SourceMeter Instrument
2-10 2470-900-01 Rev. A / May 2019
Menu overview
To access the main menu, press the MENU key on the 2470 front panel. The figure below shows the
organization of the main menu.
Figure 10: 2470 main menu
The main menu includes submenus that are labeled in green across the top of the display. Selecting
an option in a submenu opens an interactive screen.
Store measurements on a USB flash drive
If there is measurement data in the buffer, you can copy it from the 2470 to a USB flash drive. The
information is saved in the CSV file format.
To store measurement data:
1. Insert a flash drive into the front-panel USB port.
2. Press the MENU key.
3. In the Measure column, select Reading Buffers.
4. Select the buffer that you want to save.
5. Select Save to USB.
6. Enter a name for the new file.
7. Select the OK button on the displayed keyboard.
8. Select Yes to confirm saving the file.
9. Select OK to close the dialog box.
To Next Page
Loading...
Need help?
General
