Lace Work
(_ Stitch selector: 8 or 9
(_ Needle threadtension: 1 to 4
{_ Presserfoot: Zigzag foot
Laceadds a fanciful, feminine touch IQ blouses and
lingerie.Tablelinens and pillows become more elegant
whentrimmed with lace.
Foldthe raw edge of the fabric at least 5/8" (1.5 cm). Place
thelace underneath and topstitch with a blind hem stitch.
Trimthe excess fabric closeto the stitching.
Multiple Zigzag Stitch
_T_Stitchselector: 7
,_ Needle threadtension: 1 to 4
Presserfoot: Zigzagfoot
This stitch is used to finish the seam allowance on
synthetics and other labrics that tend to pucker. The stitch
is also excellent for darning and mending tears.
• Seam finishing
Place the fabrlc under the presser loot in such a manner
that the edge ts slightly inside the right-hand side of the
presser foot. Guide the fabdc so the right hand
stitches fall at the edge of the fabric.
Trim the excess close to the stitches. Be careful not to cut
the stitches.
• Mending
Position the tear under the needle so the stitch eatche_
both sides.
(-
f
%--
f
98
7
_ ,,_ 1, _,l, t
4O
To Next Page
Loading...
Need help?
General
