Kenwood C-V351 User Manual

16
C-V351/C-V301 (EN)
Sound
STEREO
PRO LOGIC
3 STEREO
Source
Direct
Main Menu 1
C D
Tuner
Tape1 / MD
6ch Input
LD / DVD
VCR
AUX
1
1
3
3
Main Menu 2
Display
Tape2 Monitor
Sleep
ENTER
ENTER ENTER
ENTER
ENTER
ENTER
ENTER
Remote control of components from the GRC (For C-V351)
Controlling the AV CONTROL CENTER
The operations required to remote control the AV CONTROL
CENTER includes the INPUT SELECTOR selection, display
mode selection, stereo selection and so on.
The following procedures show how to remote control the
basic operations of the GRC.
Operation examples
Switching the INPUT SELEC-
TOR
(Selecting the CD input)
Switching the display mode
of the AV CONTROL CENTER
Selecting the stereo mode
4 Press the ”ENTER“ key to enter the
selection.
3 Select the ”CD“ icon with the joy-
stick.
1 Select the ”Main Menu“ icon in the
fixed segment screen by operating
the joystick.
2 Press the ”ENTER“ key to enter the
selection.
5 The input source is switched to ”CD“.
÷ Other input than CD can be selected in
step 3.
4 Press the ”ENTER“ key to enter the
selection.
3 Select the ”Main Menu“ icon again.
1 Select the ”Main Menu“ icon in the
fixed segment screen by operating
the joystick.
2 Press the ”ENTER“ key to enter the
selection.
5 Select the ”Display“ icon.
6 Press the ”ENTER“ key to enter the
selection.
÷ It is also possible to select the Tape 2
Monitor or Sleep icon in step 5.
7 Each press of the ”ENTER“ key
switches the display mode.
4 Press the ”ENTER“ key to enter the
selection.
3 Select the ”STEREO“ icon with the
joystick.
1 Select the ”Sound“ icon in the fixed
segment screen by operating the joy-
stick.
2 Press the ”ENTER“ key to enter the
selection.
÷ It is also possible to select the Pro Logic,
3 STEREO or Source Direct icon in step
3.
Main operation menu
For C-V351
ON/STANDBY
MUTE
VOLUME
ENTER
Main Menu 1
C D
Tuner
Tape1 / MD VCR
AUX
Confirm Set Up Return
Input
Source
Main Menu
TapeA
TapeB
Tape1
LD Tuner CD
VCR2
VCR1TVSat.Cable
LD / DVD
6ch Input
Confirm
Set Up
Return
Main
Menu
Confirm
Set Up
Return
Main
Menu
Confirm
Set Up
Return
Main
Menu
Confirm
Set Up
Return
Main
Menu
1

Kenwood C-V351 Specifications

Audio

total harmonic distortion	0.01 %
signal to noise ratio CD	93 dB
input sensitivity / impedance CD	200 mV / 47kΩ

FM Tuner

tuning frequency range	87.5 MHz~108 MHz
usable sensitivity MONO	1.2 µV (at 75 Ω) / 13.2 dBf
signal to noise ratio MONO	65 dB (65.2 dBf input)

Weight and Dimensions

dimensions	W:400 mm H:105 mm D:382 mm
weight	5.2 kg
power consumption	25 W