Kenwood C-V351 User Manual

35
C-V351/C-V301 (EN)
TV
What is DSP?
The DSP stands for Digital Signal Processor. In the DSP presence mode, the reverberation components (elements of sound echoed in
various spaces) which determine the feeling of presence are created by digital processing by the DSP without spoiling the sound quality
of the original music source.
Note
Note
Recommended speaker installation
It is recommended that the surround speakers are installed straight to the left and right of the listening position or slightly behind, at a height
of about 1 meter higher than the listener’s ears.
DSP mode
The DSP mode lets you add the atmosphere of an arena, jazz club, or
stadium to almost any type of program source.* These modes are
particularly effective when used with stereo program sources, like
CD, television, and FM radio. You might enjoy trying the STADIUM or
ARENA mode the next time you watch a concert or sporting event!
The EFFECT level lets you adjust the “presence” of the sonic
environment according to your preference.
* The DSP mode will produce a stereo-like surround effect from
monaural sources, but there will be some reduction in the presence
of the arena, jazz club, or stadium (etc.).
Front Speaker
Subwoofer*
Surround speaker
* Optional in this mode.
Ambience effects

Kenwood C-V351 Specifications

Audio

total harmonic distortion	0.01 %
signal to noise ratio CD	93 dB
input sensitivity / impedance CD	200 mV / 47kΩ

FM Tuner

tuning frequency range	87.5 MHz~108 MHz
usable sensitivity MONO	1.2 µV (at 75 Ω) / 13.2 dBf
signal to noise ratio MONO	65 dB (65.2 dBf input)

Weight and Dimensions

dimensions	W:400 mm H:105 mm D:382 mm
weight	5.2 kg
power consumption	25 W