Kenwood C-V351 User Manual

45
C-V351/C-V301 (EN)
AV CONTROL CERTER KC-2
1
Example: Adjustment to 8:15
CLOCK
÷ The time is represented in 12-hour AM/PM method.
÷ Press the CLOCK key. The hour is entered and the minute display
starts to blink.
3
÷ If you make a mistake, restart from the beginning.
÷ To adjust correct time, press the CLOCK key at the same moment as
a time announcement.
2
TUNING
PTY SELECT
TUNING
PTY SELECT
CLOCK
CLOCK
1 Input selection display
2 DOLBY/DSP/STEREO display
3 Clock display (about 5 seconds)
ENTER
ENTER
Display
ENTER
÷ The time display starts to blink.
Clock adjustment
This unit incorporates a clock function. Be sure to adjust the
correct time before using the timer function.
The time display blinks after a power failure or
when the power cord has been unplugged from
the AC outlet and plugged in again. In such a
case, adjust the clock again.
Activate the clock adjustment mode.
Press the CLOCK key.
Enter the hour.
1 Set the "hour".
To decrease the figure To increase the figure
Enter the minute.
To decrease the figure To increase the figure
Main unit
Main unit
Main unit
: Keys or controls to be used in this operation
Displaying the Time
AM

1
2: ) )
AM


8: ) )
AM


8: 1 5
Each press switches the indication.
RC
GRC
DISPLAY
R
O
L
O
G I
P
C
AM


8: 1 7
MHz
8
9
;
))
2 Press the CLOCK key.
1 Set the "minute".
2 Press the CLOCK key.
Main
Menu
Main
Menu

Kenwood C-V351 Specifications

Audio

total harmonic distortion	0.01 %
signal to noise ratio CD	93 dB
input sensitivity / impedance CD	200 mV / 47kΩ

FM Tuner

tuning frequency range	87.5 MHz~108 MHz
usable sensitivity MONO	1.2 µV (at 75 Ω) / 13.2 dBf
signal to noise ratio MONO	65 dB (65.2 dBf input)

Weight and Dimensions

dimensions	W:400 mm H:105 mm D:382 mm
weight	5.2 kg
power consumption	25 W