Kenwood CS-5200 Series User Manual

SAFETY
Symbol in This lanual
/f\ This symbol indicates where applicable cautionary or other i information is to be found.
Power Source
This equipment operates from a power source that does not apply more than 250 V rms
between the supply conductors or between either supply conductor and ground. A protective
ground connection by way of the grounding conductor in the power cord is essential for
safe operation.
Grounding the Product
This equipment is grounded through the grounding conductor of the power cord. To avoid
electrical shock, plug the power cord into a properly wired receptacle before connecting
to the equipment input or output terminals.
Use the Proper Power Cord
Use only the power cord and connector specified for your product.
Use the Proper Fuse
To avoid fire hazard, use a fuse of the correct type.
Do not Operate in Exp Ios i ve Atmospheres
To avoid explosion, do not operate this product in an explosive atmosphere.
Do not Remove Cover or Panel
To avoid personal injury, do not remove the cover or panel. Refer servicing to
qualified personnel.
Voltage Conversion
If the power source is not applied to your product, contact your dealer. To avoid
electrical shock, do not perform the voltage conversion.

Kenwood CS-5200 Series Specifications

General

Brand	Kenwood
Model	CS-5200 Series
Category	Test Equipment
Language	English