6) The Instrument Is
equipped
with
auxiliary
support.
You can use it either
horizontally
or
vertically.
Do not place any object on the top of the instrument or position it in
areas
where
the
ventilation
holes in the casing are blocked. Any
blockage
wi11
cause
the
temperature
of the
internal
components
to increase,
resulting
in possible
damage.
7)
Connect
a
ground
wire to the GND terminal for
safety.
8) If the
power
is turned on and off repeatedly, the
oscillscope
may malfunction.
Once
the
power
is turned off, leave
five
seconds
before turning the
power
on again.
9) The
probes
supplied with the oscilloscope are precision
parts.
Handle
them
with great
care.
[The
probes
supplied with the
CS-5230, CS-5260,
or
CS-5270
have
terminals for
detect ing
readout
signals.
Do not use
them
with an osci1loscope with no
probe
detection
function.
]
3
To Next Page
Loading...
Need help?
General
