2 BASIC OPERATION
FUNC (K)/Ver. 1.01 Confidential Contents Index 13
Transceiver Operation
1. Select a Zone-Group ID to be used. (Refer to 2.4
Changing the Zone on page 9, 2.5 Changing the
CH/GID on page 9.)
2. Keep pressing the PTT switch.
3. Speak into the microphone after the transceiver
establishes a link to a repeater.
4. Release the PTT switch.
The transceiver enters receiving mode.
Configuration using KPG-101D
• Configuring the Transmit Frequency (Refer to
FPRG 6.5.4 Transmit Frequency.)
• Configuring the Encode ID (Refer to FPRG 6.6.3
Encode ID.)
2.11 Transmitting with
Talk Around
This function allows a user to communicate with another
transceiver without using a repeater. (Refer to 11 Talk
Around on page 34.)
2.11.1 Conventional Group
Transceiver Operation
1. Select a Zone-channel to be used. (Refer to 2.4
Changing the Zone on page 9, 2.5 Changing the
CH/GID on page 9.)
2. Press the Talk Around key.
3. Press the PTT switch.
The transceiver transmits on the Receive
Frequency and sends the Receive QT/DQT
instead of transmitting on the Transmit Frequency
and sending the Transmit QT/DQT.
2.11.2 Trunking System (TK-3173 only)
Transceiver Operation
1. Select a Talk Around Group to be used.
2. Press the PTT switch.
The transceiver transmits on the Receive
Frequency instead of on the Transmit Frequency.
An Encode ID is used as the Transmit ID.
To Next Page
Loading...
Need help?
General
