Kenwood TK-2170 SERIES User Manual

3 DISPLAY
FUNC (K)/Ver. 1.01 Confidential Contents Index 15
3.4 LCD
The LCD of the transceiver appears as follows:
Figure 3-1 TK-2170/ TK-3170/ TK-3173 LCD
 Available Alphanumeric Digits and Symbols
for the Display
Figure 3-2 Available Alphanumeric Digits and
Symbols for the Display
The following items can be configured for the LCD:
• Zone Name
• Zone-name Text Length
• CH/GID Name
• Display Character
• Power-on Text
Note: Following alphanumeric digits and symbols can be entered.
Table 3-1 Available Characters
3.4.1 Zone Name
Zone Name can be used to assign a name to a zone.
A maximum of 8 alphanumeric digits can be configured
for each zone. Using Zone Name allows a user to more
easily recognize each zone.
A part of the Zone Name appears on the display if Zone
Name and Zone-name Text Length are configured.
(Refer to 3.4.2 Zone-name Text Length on page 15.)
Zone Name can be configured by using KPG-101D.
 Configuration using KPG-101D
• Configuring the Zone Name (Conventional Group)
(Refer to FPRG 6.2.1 Zone Name.)
• Configuring the Zone Name (Trunking System)
(Refer to FPRG 6.3.1 Zone Name.)
3.4.2 Zone-name Text Length
Zone-name Text Length can be used to display a part of
the Zone Name on the display.
The numeric value configured for Zone-name Text Length
determines the number of characters of the Zone Name
that appear on the display.
Zone-name Text Length can be configured by using
KPG-101D.
Table 3-2 Example of Zone-name Text Length Display
 Configuration using KPG-101D
• Configuring the Zone-name Text Length (Refer to
FPRG 6.7.1 Common Page 1 Tab - Zone-name
Text Length.)
(space) # $ % ( ) * + - / 0 1 2 3 4 5 6 7 8 9 = @ \
_ A B C D E F G H I J K L M N O P Q R S T U V
W X Y Z
Item Configuration
Zone-name Text Length 3
Zone Name KENWOOD
CH/GID Name CH 1
Annunciator

Kenwood TK-2170 SERIES Specifications

General

Brand	Kenwood
Model	TK-2170 SERIES
Category	Two-Way Radio
Language	English