Kenwood TK-2170 SERIES User Manual

3 DISPLAY
16 Index Contents Confidential FUNC (K)/Ver. 1.01
3.4.3 Channel Name
Channel Name can be used to assign a name to a
channel.
A maximum of 8 alphanumeric digits can be configured
for each channel. Using Channel Name allows a user to
more easily recognize each channel.
Channel Name can be configured by using KPG-101D.
 Configuration using KPG-101D
• Configuring the Channel Name (Refer to FPRG
6.4.7 Channel Name.)
3.4.4 GID Name
GID Name is a name assigned to a Group ID.
A maximum of 8 alphanumeric digits can be configured
for each GID. Using GID Name allows a user to more
easily recognize each Group ID.
GID Name can be configured by using KPG-101D.
 Configuration using KPG-101D
• Configuring the GID Name (Refer to FPRG 6.6.5
GID Name.)
3.4.5 Display Character
Display Character can be used to display the CH/GID
Name or Zone-CH/GID Number.
CH/GID Name and Zone-CH/GID Number can be
switched by pressing the Display Character key.
Display Character can be configured by using
KPG-101D.
 Configuration using KPG-101D
• Configuring the Display Character (Refer to FPRG
6.7.1 Common Page 1 Tab - Display Character.)
• Assigning functions to the Selector and PF keys
(Refer to FPRG 6.8 Key Assignment.)
3.4.6 Power-on Text
Power-on Text can be used to display characters when
the transceiver is turned ON.
The message configured for Power-on Text appears for 2
seconds after the transceiver is turned ON.
Power-on Text can be configured by using KPG-101D.
Note:
 The power-on text disappears if a key is pressed while the
power-on text is displayed.
 If Transceiver Password is configured, the power-on text
appears on the display after the Transceiver Password is reset
and all LCD segments appear.
 Configuration using KPG-101D
• Configuring the Power-on Text (Refer to FPRG
6.7.2 Common Page 2 Tab - Text.)

Kenwood TK-2170 SERIES Specifications

General

Brand	Kenwood
Model	TK-2170 SERIES
Category	Two-Way Radio
Language	English