22
5-TONE SIGNALING
5-tone Signaling is enabled or disabled by your dealer. This
function opens the squelch only when the transceiver receives
the 5 tones programmed in your transceiver. Transceivers
that do not transmit the correct tones will not be heard.
Note: Your transceiver functions include either 5-tone Signaling or
FleetSync {page 24}, but not both.
MY ID
Your dealer can program an ID number for your transceiver, to
identify you to other parties when you make a call. If set by
your dealer, you can edit the ID number:
1 If the ID number is set to be edited, the ID number will
appear on the display when you turn the transceiver power
ON.
2 To change the ID number, enter the new ID by rotating the
selector or using the DTMF keypad.
• When rotating the selector to enter a digit, select the desired
digit, then press the <B or C> key to shift the cursor to the left
or right. Repeat this process until the entire ID is entered.
3 Press the S or key to complete the entry.
MAKING A SELCALL (SELECTIVE CALL)
A Selcall is a voice call to a particular station. To make a
Selcall:
1 Press the key programmed as Selcall to enter Selcall
Mode.
2 Rotate the selector or enter an appropriate number using
the DTMF keypad to select the ID of the station you want
to call.
• When rotating the selector to enter a digit, select the desired
digit, then press the <B or C> key to shift the cursor to the left
or right. Repeat this process until the entire ID is entered.
To Next Page
Loading...
Need help?
General Specifications
Battery
Weight and Dimensions
