EasyManuals Logo

Kenwood TK-2170 User Manual

Kenwood TK-2170
49 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #48 background imageLoading...
Page #48 background image
41
BATTERY STATUS INDICATOR
The battery status indicator displays the battery power
remaining when using an optional battery pack, as illustrated
below. (The battery status indicator does not appear while
using alkaline batteries.)
High Sufficient Low Very Low
When the battery power is very low, replace or recharge the
battery pack. If activated by your dealer, an alert tone will
sound every 30 seconds and the LED indicator will blink red
when the battery power is low.
BEGINNING/ END OF TRANSMIT SIGNAL
The Beginning of Transmit and End of Transmit identification
signals are used to access and release some repeaters.
If Beginning of Transmit is set, the ID signal is transmitted
when you press the PTT switch.
If End of Transmit is set, the ID signal is transmitted when you
release the PTT switch.
If both are set, the ID signal is transmitted when you press
and release the PTT switch.

Table of Contents

Other manuals for Kenwood TK-2170

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kenwood TK-2170 and is the answer not in the manual?

Kenwood TK-2170 Specifications

General Specifications IconGeneral Specifications
frequency range136~174MHz
number of channelsMax. 128 per radio
channel spacingWide: 25, 30kHz; Narrow: 12.5, 15kHz
battery voltage7.5V DC ± 20%
antenna impedance50Ω
channel frequency spread38MHz
Battery IconBattery
battery life with KNB-24L (1400mAh)9 hours
battery life with KNB-25A (1200mAh)8 hours
battery life with KNB-26N (2000mAh)12 hours
battery life with KNB-35L (1950mAh)11 hours
Operating Environment IconOperating Environment
operating temperature range–22°F~+140°F (–30°C~+60°C)
frequency stability± 0.00025% (–22°F~+140°F)
Receiver IconReceiver
sensitivity (12dB SINAD) Wide0.25µV
sensitivity (12dB SINAD) Narrow0.28µV
selectivity Wide70dB
selectivity Narrow65dB
intermodulation distortion Wide65dB
intermodulation distortion Narrow60dB
spurious response65dB
audio output (8Ω impedance)500mW with less than 5% distortion
Transmitter IconTransmitter
RF power output HI5W
RF power output LO1W
spurious response70dB
modulation Wide16K0F3E
modulation Narrow11K0F3E
FM hum & noise Wide45dB
FM hum & noise Narrow43dB
audio distortion W/NLess than 5%
Weight and Dimensions IconWeight and Dimensions
weight with battery, antenna, and beltclip12.0 oz. (340 g)
dimensions with KNB-24L or 35L battery56 x 109 x 31.7 mm
dimensions with KNB-25A or 26N battery56 x 109 x 37.9 mm

Related product manuals