Kenwood VR-6050 User Manual

Names and functions of parts
Main unit
Speaker MUTE CLIP Input mode Listen mode
indrcators Indicator rndrcator indicators rndicators
RDS indicators
AUTO indrcator
MEMORY indicator
STEREO rndrcator
Speaker selection indicators
Input channel indicators
Output channel indrcators
Display
Frequency display
Input display
Preset channel display
Surround mode display
ForVR-6050
For KRF-V7060D and
KRF-V6060D (For the U.K. only)
0 POWER ON/OFF key
(For KRF-V7060D/V6060D)
-&
Use to turn the main power ON/OFF
0 ON/STANDBY 0 key
(For KRF-V7060D/V6060D) -2L
Use to turn the power ON/STANDBY when
the POWER IS turned ON
STANDBY indicator
0 POWER ON/STANDBY ti key
(For VR-6050)
-de
Use to turn the power ON/STANDBY
STANDBY indicator
@ A SPEAKERS B keys -&?,
Use to turn the A/B speakers ON/OFF.
0 LOUDNESS key
-22
Use to swatch the status of LOUDNESS
0 SPEAKER EQ key -122
Use to select SPEAKER EQ’s setting.
0 Surround indicators
DSP indicator
-&
Lrghts when the receiver IS in the DSP mode.
SPEAKER EQ indicator
-D@L
Lrghts when the recerver IS rn the SPEAKER
EQ mode.
ACTIVE EQ indicator
-,-Gf
Lrghts when the receiver IS rn the ACTIVE EQ
mode.
DOLBY DIGITAL indicator
-L&
Lights when the recerver IS rn the Dolby
Digrtal mode.
Standby mode
DTS indicator
-2%
Lrghts when the recerver IS In tlhe DTS mode.
CS 5 indicator
-2%
Lights when the recerver IS II, tile CIRCLE
SURROUND II mode
0 ACTIVE ECI key
-22
Use to select ACTIVE EQ’s setting.
0 DSP key
-2%
Use to select any of the DSP mode
0 STEREO key
-2%
Use to swatch the listen mode to STEREO
@ INPUT MODE key - -Q-l
Use to swatch between the full auto, dIgital
and analog Inputs
@ DIMMER key
Use to select the REC MODE
- 23
Use to adjust the brrghtness of the drsplay
-X
@ VOLUME CONTROL knob
- 21.
@ MUTE key
- ??.
Use to temporarrly mute the sound
8 PHONES jack
- 22.
Use for headphone lrstenrng
@ Input Selector keys
- 21
DVD/GCH,CD/DVD,AUXfforVR-6050/KRF-
V6060D) or PHONO Ifor KRF-V7060D and
KRF-V6060D (for the U.K. onlyll, TUNER,
VIDEO 1, VIDEO 2, VIDEO 3, MD/TAPE
Use to select Input sources
@ SOUND key
-2%
Use to adjust the sound quality and the ambr-
ence effects
0 BAND key
- 24
Use to select the broadcast band
0 AUTO key
- 24
Use to select the auto or manila1 tunrng
mode.
@ TONE key
-2;
Use to switch the stators of TONE control
@I MEMORY key
-25-26
Use to store radio stations 117 the preset
memory and to start the Auto Memory (for
the U.K only)
0 SETUP key
- !?.
Use to select the speakers’ settlngs etc
@ A/V keys
-118
Usefor selectronad~ustmentsdurrng SOUND,
SETUP and PRESET CHANNEL functrons
@ MULTI CONTROL knob
- !Q-
Use to control a varrety of settrngs
@ LISTEN MODE knob
-8 2%
Use to select the Ilstenrng rmode
0 zkUX (S VIDEO, VIDEO, AUDIO L/R)
- 16_
@ AV AUX key
- !6
Use to switch the rt?put to AV AUX
While the standby rndrcator IS lit, a small amount of power IS supplIed
to the system to back up the memory. This IS called standby mode
Under the condrtron, the system can be turned ON by remote control
unrt.
The power II? thus eqLirpment wrll not be completely ctrt off frown the AC
wall outlet wher? the main swatch IS turned OFF
gEN

Kenwood VR-6050 Specifications

General

Brand	Kenwood
Model	VR-6050
Category	Receiver
Language	English