KERN AEJ-C Series User Manual

34 AEJ-C/AES-C/PLJ-C-BA-e-1621
9 Weighing mode
The sequence of a simple weighing process is described in the chapter on Weighing
below. Apart from the work steps described there (simple weighing, reset to zero,
taring) the weighing balance offers additional options for adapting the “Weighing”
application to your requirements. For the settings available see chap. 9.3
9.1 Weighing
For warm-up time required for stabilisation, see chpt 1.
9.1.1 Simple weighing
• Check zero display [ ] and set to zero with the help of the key, as
required.
• Place load on sample dish
• Wait until the stability display appears ( ).
• Read weighing result.
After pressing you can save the weighing value and if an optional printer is
connected, print out the result.
9.1.2 Zeroing
In order to obtain optimal weighing results, reset to zero the balance before weighing.
Reset to zero is restricted to a range of ±2% Max. An error message Err2 will appear
in case of values exceeding ±2% Max.
• Unload the balance
• Press and zero display as well as indicator will appear.

KERN AEJ-C Series Specifications

General

Brand	KERN
Model	AEJ-C Series
Category	Scales
Language	English